View APT75M50L_1211918.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

APT75M50B2 APT75M50L
500V, 75A, 0.075 Max
N-Channel MOSFET
Power MOS 8TM is a high speed, high voltage N-channel switch-mode power MOSFET. A proprietary planar stripe design yields excellent reliability and manufacturability. Low switching loss is achieved with low input capacitance and ultra low Crss "Miller" capacitance. The intrinsic gate resistance and capacitance of the poly-silicon gate structure help control slew rates during switching, resulting in low EMI and reliable paralleling, even when switching at very high frequency. Reliability in flyback, boost, forward, and other circuits is enhanced by the high avalanche energy capability.
T-MaxTM
TO-264
APT75M50B2 Single die MOSFET
APT75M50L
D
G S
FEATURES
* Fast switching with low EMI/RFI * Low RDS(on) * Ultra low Crss for improved noise immunity * Low gate charge * Avalanche energy rated * RoHS compliant
TYPICAL APPLICATIONS
* PFC and other boost converter * Buck converter * Two switch forward (asymmetrical bridge) * Single switch forward * Flyback * Inverters
Absolute Maximum Ratings
Symbol ID IDM VGS EAS IAR Parameter Continuous Drain Current @ TC = 25C Continuous Drain Current @ TC = 100C Pulsed Drain Current Gate-Source Voltage Single Pulse Avalanche Energy 2 Avalanche Current, Repetitive or Non-Repetitive
1
Ratings 75 47 230 30 1580 37
Unit
A
V mJ A
Thermal and Mechanical Characteristics
Symbol PD RJC RCS TJ,TSTG TL WT Characteristic Total Power Dissipation @ TC = 25C Junction to Case Thermal Resistance Case to Sink Thermal Resistance, Flat, Greased Surface Operating and Storage Junction Temperature Range Soldering Temperature for 10 Seconds (1.6mm from case) Package Weight 0.22 6.2 10 1.1 -55 0.11 150 300 Min Typ Max 1040 0.12 Unit W C/W
C
9-2006 050-8082 Rev A
oz g in*lbf N*m
Torque
Mounting Torque ( TO-264Package), 4.40 or M3 screw
Microsemi Website - http://www.microsemi.com
Static Characteristics
Symbol
VBR(DSS) VBR(DSS)/TJ RDS(on) VGS(th) VGS(th)/TJ IDSS IGSS
TJ = 25C unless otherwise specified
Test Conditions
VGS = 0V, ID = 250A Reference to 25C, ID = 250A VGS = 10V, ID = 37A VGS = VDS, ID = 2.5mA VDS = 500V VGS = 0V TJ = 25C TJ = 125C
APT75M50B2_L
Typ 0.60 0.064 4 -10 Max Unit V V/C V mV/C A nA
Parameter
Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Drain-Source On Resistance
3
Min 500
Gate-Source Threshold Voltage Threshold Voltage Temperature Coefficient Zero Gate Voltage Drain Current Gate-Source Leakage Current
3
0.075 5 25 500 100
VGS = 30V
Dynamic Characteristics
Symbol
gfs Ciss Crss Coss Co(cr) Co(er) Qg Qgs Qgd td(on) tr td(off) tf
4
TJ = 25C unless otherwise specified
Test Conditions
VDS = 50V, ID = 37A VGS = 0V, VDS = 25V f = 1MHz
Parameter
Forward Transconductance Input Capacitance Reverse Transfer Capacitance Output Capacitance Effective Output Capacitance, Charge Related
Min
Typ 55 11600 160 1250 725
Max
Unit S
pF
5
VGS = 0V, VDS = 0V to 333V
Effective Output Capacitance, Energy Related Total Gate Charge Gate-Source Charge Gate-Drain Charge Turn-On Delay Time Current Rise Time Turn-Off Delay Time Current Fall Time
VGS = 0 to 10V, ID = 37A, VDS = 250V Resistive Switching VDD = 333V, ID = 37A RG = 2.2 6 , VGG = 15V
365 290 65 130 45 55 120 39 nC
ns
Source-Drain Diode Characteristics
Symbol
IS ISM VSD trr Qrr dv/dt
Parameter
Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) 1 Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Peak Recovery dv/dt
Test Conditions
MOSFET symbol showing the integral reverse p-n junction diode (body diode)
Min
D
Typ
Max 100
Unit A
G S
230 1 695 17 8 V ns C V/ns
ISD = 37A, TJ = 25C, VGS = 0V ISD = 37A 3 diSD/dt = 100A/s, TJ = 25C ISD 37A, di/dt 1000A/s, VDD = 333V, TJ = 125C
1 Repetitive Rating: Pulse width and case temperature limited by maximum junction temperature. 2 Starting at TJ = 25C, L = 2.31mH, RG = 2.2, IAS = 37A. 3 Pulse test: Pulse Width < 380s, duty cycle < 2%. 4 Co(cr) is defined as a fixed capacitance with the same stored charge as COSS with VDS = 67% of V(BR)DSS. 5 Co(er) is defined as a fixed capacitance with the same stored energy as COSS with VDS = 67% of V(BR)DSS. To calculate Co(cr) for any value of VDS less than V(BR)DSS, use this equation: Co(er) = -1.65E-7/VDS^2 + 5.51E-8/VDS + 2.03E-10. 6 RG is external gate resistance, not including internal gate resistance or gate driver impedance. (MIC4452)
Microsemi reserves the right to change, without notice, the specifications and information contained herein.
050-8082
Rev A
9-2006
300 250 ID, DRAIN CURRENT (A)
V
GS
= 10V
140 120 ID, DRIAN CURRENT (A)
TJ = -55C
APT75M50B2_L
T = 125C
J
V
GS
= 7,8 & 10V
200 150 100 50 0
TJ = 125C TJ = 25C
100 80 60 40 20 0 0
6V
TJ = 150C
5V
4.5V
25 20 15 10 5 0 VDS(ON), DRAIN-TO-SOURCE VOLTAGE (V) Figure 1, Output Characteristics
NORMALIZED TO VGS = 10V @ 37A
30 25 20 15 10 5 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 2, Output Characteristics
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
2.5
250
VDS> ID(ON) x RDS(ON) MAX. 250SEC. PULSE TEST @ <0.5 % DUTY CYCLE
2.0 ID, DRAIN CURRENT (A)
200
1.5
150
TJ = -55C TJ = 25C TJ = 125C
1.0
100
0.5
50
0 25 50 75 100 125 150 0 -55 -25 TJ, JUNCTION TEMPERATURE (C) Figure 3, RDS(ON) vs Junction Temperature 100
TJ = -55C
0
0
8 7 6 5 4 3 2 1 VGS, GATE-TO-SOURCE VOLTAGE (V) Figure 4, Transfer Characteristics
20,000 10,000
Ciss
gfs, TRANSCONDUCTANCE
80 C, CAPACITANCE (pF)
TJ = 25C
60
TJ = 125C
1000
Coss
40
100 Crss
20
0
0
10
20 30 40 50 60 70 ID, DRAIN CURRENT (A) Figure 5, Gain vs Drain Current
80
500 400 300 200 100 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 6, Capacitance vs Drain-to-Source Voltage 0 200 ISD, REVERSE DRAIN CURRENT (A) 180 160 140 120 100 80 60 40 20 0 0
TJ = 25C
10
16 VGS, GATE-TO-SOURCE VOLTAGE (V) 14 12 10 8 6 4 2
ID = 37A
VDS = 100V
VDS = 250V
VDS = 400V
050-8082
50 100 150 200 250 300 350 400 Qg, TOTAL GATE CHARGE (nC) Figure 7, Gate Charge vs Gate-to-Source Voltage 0
0
1.5 1.2 0.9 0.6 0.3 VSD, SOURCE-TO-DRAIN VOLTAGE (V) Figure 8, Reverse Drain Current vs Source-to-Drain Voltage
Rev A
9-2006
TJ = 150C
300 100 ID, DRAIN CURRENT (A)
I
300 100 ID, DRAIN CURRENT (A)
I
APT75M50B2_L
DM
DM
10
Rds(on)
13s 100s 1ms 10ms
100ms DC line
10
Rds(on)
13s 100s 1ms 10ms
100ms DC line
1
TJ = 125C TC = 75C
1
TJ = 150C TC = 25C
0.1
1
800 100 10 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 9, Forward Safe Operating Area
0.1
Scaling for Different Case & Junction Temperatures: ID = ID(T = 25C)*(TJ - TC)/125
C
800 100 10 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 10, Maximum Forward Safe Operating Area 1
TJ (C)
0.00787 Dissipated Power (Watts) 0.0105 0.0341 0.509 0.0416
TC (C)
0.0709 ZEXT are the external thermal impedances: Case to sink, sink to ambient, etc. Set to zero when modeling only the case to junction.
Figure 11, Transient Thermal Impedance Model 0.14 ZJC, THERMAL IMPEDANCE (C/W) 0.12
D = 0.9
0.10
0.7
0.08 0.06 0.04 0.02 0
0.5
Note:
ZEXT
PDM
t1 t2
0.3 0.1 0.05 SINGLE PULSE
Duty Factor D = 1/t2 Peak TJ = PDM x ZJC + TC
t1 = Pulse Duration
t
10-5
10-1 10-2 10-3 RECTANGULAR PULSE DURATION (seconds) Figure 12. Maximum Effective Transient Thermal Impedance Junction-to-Case vs Pulse Duration 10-4
1.0
T-MAXTM (B2) Package Outline
4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244)
TO-264 (L) Package Outline
4.60 (.181) 5.21 (.205) 1.80 (.071) 2.01 (.079) 19.51 (.768) 20.50 (.807) 3.10 (.122) 3.48 (.137) 5.79 (.228) 6.20 (.244)
e3 100% Sn Plated
Drain
20.80 (.819) 21.46 (.845)
Drain
25.48 (1.003) 26.49 (1.043)
4.50 (.177) Max.
2.87 (.113) 3.12 (.123) 1.65 (.065) 2.13 (.084) 2.29 (.090) 2.69 (.106) 19.81 (.780) 21.39 (.842)
2.29 (.090) 2.69 (.106)
9-2006
0.40 (.016) 0.79 (.031)
19.81 (.780) 20.32 (.800)
1.01 (.040) 1.40 (.055)
Gate Drain Source
0.48 (.019) 0.84 (.033) 2.59 (.102) 3.00 (.118)
Gate Drain Source
Rev A
2.21 (.087) 2.59 (.102)
5.45 (.215) BSC 2-Plcs.
0.76 (.030) 1.30 (.051) 2.79 (.110) 3.18 (.125) 5.45 (.215) BSC 2-Plcs.
050-8082
These dimensions are equal to the TO-247 without the mounting hole. Dimensions in Millimeters and (Inches)
Dimensions in Millimeters and (Inches)
Microsemi's products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.

▲Up To Search▲

Price & Availability of APT75M50L

	To Download APT75M50L Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .